POK, full catalogue English

171 POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE Phone: +33 (0)3 37 49 53 - 000 - Email: export@pok-fire.com - Web: www.pok-fire.com TECHNO V2 The control system TECHNO V2 allows wired control of all STACS Lite compatible fixed monitors. Equipped with the main electrical safety functions (switch-disconnector, circuit breaker), the control cabinet is fit with a latest-generation on-board PLC, the most efficient on the market, which controls the monitor and dialogue with the operator. In combination with the monitors integrated encoder motors, the control system eliminates any mechanical stress thanks to a highly sophisticated position control algorithm. A backup battery system provides power to the monitor when the main power is off. Associated with its smart charger, spare batteries are always kept at an optimum charge level. The wired remote control is connected via a CANopen bus by cable. If the distance between these two elements were to exceed a few hundred metres, a fibre optic connection would be used. An automatic operating mode triggers the sweeping of the monitor in the event of a fire. Thanks to its compact and lightweight (less than 2 kg) ventral console, the remote control offers the performance and safety essential for the monitors smooth operations. Its strong and original (wireless) manipulators allow a flexible and very precise control of the horizontal and vertical movements and of the diffuser. Additional options ergonomically placed on the interface allow the control of a valve and the selection of the operating mode (automatic or manual). A redundant, self-monitoring emergency stop push button allows the operator to stop all movements immediately in the event of a hazard. A graphic display of 4.3 inches (optional) provides in real time the position of the monitor and informs the operator about the status of the set-up (current sweeping, level of the battery charge, installation setting, storage and attach). The automatic sweeping in the horizontal and vertical directions can be started by simply pressing a push button. Electronic stops configured using an intuitive configuration menu allows defining the monitors position at any time. This system allows up to two monitor to be controlled from the same control panel (one monitor at a time). Power supply: 230 VAC - 16A - 50 Hz Spare batteries (optional) 24V - 18 Ah Connection: Sealed disconnectable connectors IP67 Operation modes: Manual: movements control by remote control Automatic: automatic sweeping triggered by external data (hot spot detection) Remote-controlled features: Vertical (proportional control with sweeping option) Horizontal (proportional control with automatic sweeping option) Diffuser (on-off control) Valve (open / close) Emergency stop Configurable settings: Electronic stops Attack position of the monitor Storage position of the monitor Position display User-defined area sweeping FIXED monitor Power supply OR 24 V + - Designation Ref. Techno V2 wired remote control set, with 230 VAC/50Hz power supply for the receiver, battery backed up TC009277 Techno V2 wired remote control set, with 230 VAC/50Hz power supply for the receiver, not battery-backed TC009279 Monitor - Remote control systems